Multifunction Meters
Advanced power and energy meters are revenue-grade devices used to monitor energy consumption and power quality in buildings, automation, or power distribution systems. Critical information such as metering data, waveform capture, harmonics, alarm limits, and I/O is supplied for energy analysis and control.
ENERGY METER
Acuvim II Series
Advanced revenue grade ANSI C12.21 class 0.2 energy meter with Modbus-RTU & DNP3 support for over 400 and power quality parameters. Up to 8GB data logger with 3 historical profiles. Configure any rate structure combination for time-based, calendar-based, demand-based, or tier-based.
ENERGY METER
Acuvim IIBN
BTL Listed BACnet power meter with ANSI C12.21 class 0.2 accuracy. Measure over 100 real-time metering parameters. Monitor electrical parameters on single, two and three element systems. No PT/VT needed, directly measure up to 400V L-N or 690V L-L.
ENERGY METER
Acuvim L Series
Multifunction power & energy meter with ANS C12.20 class 0.2 accuracy for power quality analysis, time-of-use (TOU) and 16 over/under alarm configurations for any of 80 available parameters. Modbus-RTU, BACnet MS/TP & PROFIBUS plus digital input/output options available.
ENERGY METER
AcuRev 1310 Series
The DIN rail power & energy meter includes four channel CT input to measure neutral current and provide residual current measurement. Auto phase-check ready to monitor wiring issues. Standard Modbus-RTU + BACnet MS/TP. Measurement Canada Approved, BTL Listed, & SunSpec compliant.
ENERGY METER
AcuDC 240 Series
DC multifunction power & energy meter with optional RS485 Modbus-RTU, & 4MB onboard data logger. Equipped with choice digital input and output; analog and relay output I/O expansion module. 0.2% accuracy on voltage and current; 0.5% on power and energy parameters.
ENERGY METER
EV300 Series
ANSI C12.20 0.5 class energy meter with support for any voltage system rated between 10V to 230V/ 400V. Potential transformer ratio configuration also supported. Auto frequency detection for 50Hz and 60 Hz systems. Multiple built-in I/O options available.
| Comparison Table |  Acuvim 3 |  Acuvim II |  Acuvim-L |  AcuRev 2100 |  AcuRev 1310 |  EV300 |  AcuDC 240 |
|---|---|---|---|---|---|---|---|
| Application | Energy Storage Systems Critical Infrastructure Power Distribution Substations | Advanced Metering Tenant Metering Integration & Control | Cost-Effective Submetering Replacing Analog Panel Meters | Multi-Circuit Monitoring Multi- Tenant Metering | Cost-Effective, Revenue Grade Metering | Economical, Three-Phase Metering | DC Metering DC Monitoring |
| Electrical System | AC | AC | AC | AC | AC | AC | DC |
| Power & Energy Metering | |||||||
| Demand, TOU | |||||||
| Individual Harmonics + THD | |||||||
| Advanced Power Quality | |||||||
| Data Logging | |||||||
| Expansion Modules | |||||||
| Communications Protocols | MODBUS RTU DNP 3.0, BACnet Modbus TCP/IP Profibus HTTP/HTTPs Post SNMP V3 & More | MODBUS RTU DNP 3.0, BACnet Modbus TCP/IP Profibus HTTP/HTTPs Post SNMP V3 & More | MODBUS RTU BACnet-IP Modbus TCP/IP Profibus HTTP/HTTPs Post SNMP & More | MODBUS RTU BACnet MS/TP BACnet Modbus TCP/IP HTTP/HTTPS Post SNMP SMTP & More | MODBUS RTU | MODBUS RTU | MODBUS RTU |
| I/O Options | Digital Input Digital Output Analog Input Analog Output Relay Output | Digital Input Digital Output Analog Input Analog Output Relay Output | Digital Input Digital Output Analog Input Analog Output Relay Output | Digital Input Digital Output Relay Output | One Relay output for alarm and remote control | Digital Input Digital Output Analog Output Relay Output | Digital Input Digital Output Analog Output Relay Output |
| Monitor Single Phase | |||||||
| Monitor Three Phase | |||||||
| Number Circuits | 1x Three Phase 3x Single Phase | 1x Three Phase 3x Single Phase | 1x Three Phase 3x Single Phase | 6x Three Phase 18x Single Phase | 1x Three Phase 3x Single Phase | 1x Three Phase 3x Single Phase | 1x DC |
| Mounting Options | Panel DIN Rail | Panel DIN Rail | Panel DIN Rail | DIN Rail | DIN Rail | Panel | Panel |